Surface Cleanning Clay 8oz bar

MoonShine Surface Cleaning Clay is a must use for the perfectionist.

Regardless of how clean and perfect you think your paintwork is, if you have not clayed the surface it’s not as well prepared as it could be. Unfortunately in today’s world, if you take your car out of the garage it is going to collect harmful environmental contaminates. These very minute airborne particles consist of tiny metallic fragments from brake pad linings and rail dust which are created from friction of metal parts. Hot metallic particulates fill the air on any well-traveled road or by railroad tracks, where they ultimately land on car finishes, burning through any wax or sealant available today. These particles embed themselves on almost any finish, including glass, and are not typically removable with polishes. Their gritty texture can be felt on your paintwork which causes your micro fiber towels to drag when rubbed along a panel. If left untreated, this contamination may cause tiny rust spots on your car’s finish.

MoonShine Surface Cleaning Clay is the latest in clay technology. It is safe for all finishes that are smooth, including single stage paints, clear coats, chrome, aluminum, plastic and glass. Using our Quick Detailer as a lubricant, rub this synthetic clay over the surface to remove contaminants, as well as tree sap, paint overspray, water spots, tar and bugs.

MoonShine Surface Cleaning Clay will provide you with ultra-smooth surfaces that will make your wax or sealant adhere better, last longer and makes the application and removal process a breeze. Our full 8 oz bar of light cut clay should clean a car about 6 -10 times depending on car size and amount of contamination. We urge you to try the clay cleaning process. You are going to love the results.

Plain Talk

·        Removes surface environmental contaminants that even polishes can’t.

·        Safe for all finishes, won’t mar finishes, and is easy to use

·        Leaves finishes soo smooth you will be amazed.   

INSTRUCTIONS FOR PROPER USE

A great product works best when used properly. Failure to follow these instructions may result in unsatisfactory results.   

1.  Thoroughly wash your car out of direct sun light with MoonShine Car Shampoo and dry with a waffle weave micro fiber towel.

2.  Be sure to work in a shaded area. The car’s paintwork should be cool to the touch.

3.  Section clay as directed in Tricks and Tips below. Before each use, fold and knead the clay to expose a fresh, unused surface.

4.  Liberally spray a small area of the car’s surface with MoonShine Quick Detailer/Clay Lubricant.

5.  Using moderate pressure, move the clay in back and forth motions across the surface. The grabbing you feel as the clay moves across the surface is the clay pulling contaminates off the surface. The clay will move freely when all contaminates have been removed. Be sure to keep the surfaces well lubed while moving the clay. Check the clay often for any particles that might scratch the surface, fold and knead the clay and work another section.

6.  Should you drop the clay, dispose of the piece to avoid scratching any surface    from grit that may have been picked up. You will be very glad you did.

7.  If you are claying the entire car, buff it clean as you go to remove any clay residue. Rewash the entire car once you have finished the claying process.

8.  Please note; After the claying process your surfaces are as naked as they could be. Do not drive this car until you have applied either a wax or sealant.

9.  To avoid having the clay break down, clay is to be used only with MoonShine Clay Lubricant.   

USEFUL TIPS & TRICKS

·    Save yourself some money; there is no need to use the entire 8 oz. bar. Unlike some brands of clay, MoonShine Surface Cleaning Clay is large enough to tear the bar into three or four equal pieces. Put two of them back in the jar for future use or if clay is accidentally dropped on the floor.

·    Perform a little test on your paintwork. Wash and dry your car. Place your hand inside a plastic sandwich bag and lightly run your fingertips over the paintwork. It should be smooth as glass. If you feel gritty little bumps, your cars finish is in need of MoonShine Surface Cleaning Clay.

·    For the ultimate smooth deep, warm, gloss, apply MoonShine Pre-Wax Cleanser as your next step before a wax or sealant is applied. The result will be truly amazing.

·    Clay your glass, especially the windshield. Follow up using glass cleaner and a micro fiber towel. Then apply a coat of wax or sealant. You will find bugs don’t stick as hard, and rain water will bead off.

      For best performance of all Moonshine Products, please store at room temperature.